The main purpose
WF-20B universal crusher is mainly applicable to the smashing processing of medium and low hardness materials such as chemical industry, dyes, additives, feed, food, medicine, sawdust, chemical fiber and non-metal minerals. The fineness is adjusted between 20-120 mesh, with High output, fine grain size, low noise, low energy consumption, simple maintenance, easy installation, etc. Hammer hammer universal grinder is especially suitable for non-oily, low viscosity, heat-sensitive, fibrous (for example: Dendrobium, pepper, ginger, cassava Tablets, peanuts, soybeans, star anise, cinnamon, white sugar, salt crystals, grains, tea, cosmetics, pearls, chemical coatings) and other medium and low hardness materials smash processing.
working principle
WF-20B universal crusher utilizes the high-speed relative motion seen by the movable tooth plate and the fixed tooth plate, and the pulverized material is crushed by the comprehensive action of the tooth impact, the friction and the material impact between each other. Hammer mill is simple in structure, solid, stable in operation and good in comminution. The crushed material can be directly discharged from the grinding chamber of the main machine, and the particle size can be obtained through the replacement of meshes of different apertures. In addition, the 20B universal mill is fully stainless steel. The inner wall of the casing is all machined to achieve a smooth surface, which has changed the phenomenon of rough and powdery deposits in the inner walls of previous models, making the production of medicines, foodstuffs and chemicals more in line with national standards and meeting the requirements of GMP.
Universal Shredder Notice
1. Before use, check whether all fasteners of the machine are tightened.
2. The spindle running direction must conform to the direction of the arrow on the protective cover, otherwise it will damage the machine and may cause personal injury.
3, check the electrical integrity.
4, check the machine crush room with no metal or other hard debris, otherwise it will destroy the tool, affecting the machine operation.
5, the material must be checked before smashing purity, do not allow metal mixed with hard debris, so as not to damage the tool or cause combustion and other accidents.
6. The oil cup on the machine should always be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before shutting down. If you do not continue to use it, remove the leftovers from the machine.
8. Periodically inspect the tool for damage. If any, replace it immediately.
9. When using the machine body, there will be slight vibration. The handle of the cover must be tightened to avoid accidents.
Universal Shredder Notice
1 Universal crusher in the external power supply should be installed according to the power of the appropriate circuit breaker, the purpose is to overload the machine, the current is too large, automatically cut off the power to protect the motor!
2 The machine is guaranteed to be attended by a person at work.
3 The crushed material particles should not be too large. In case of boring machine, the power should be cut off immediately.
4 If the crushed particles are too large, they should be crushed by the universal crusher and then crushed by the machine.
friendly reminder:
1. Different seasons, different temperatures, and different water temperatures will produce different cooling effects.
2. The heat generated by smashing different materials is different, and the temperature rises differently.
3. The lower the temperature of the water flowing into the water-cooled device, the better the cooling (heat removal) effect.
4. The melting point and ignition point of different materials are different. The user must have a full understanding and grasp of the material being crushed.
5. The water cooling device must be additionally booked and installed.
